Have you ever experienced the challenges you have faced with printer and copy machine problems – and anyone remembers the printer frustrations while doing any of your work. Office copier machines have an incredible capacity for causing frustrations. In this article, you can learn some tips for the most common printer problems and their resolution.
LINES ON PAPER
If you have ever seen the output of the copy containing any lines, streaks, and other deformities while making a copy of a document with simple text and image, then there is a problem with the copier machine. There are many reasons for this issue can arise; searching for the right solution can need a bit of photocopier troubleshooting.
Possible causes for this copier machine issues include:
Drum-blade failure, resulting in big lines vertically down the page
Foreign substances on the scanner mirrors or glass
Drum or developer unit breakdown
PROBLEM WITH FUSERS
The foremost issue is resolved by cleaning the mirrors, scanner glass and removing interferences. Check your copier machine properly cleaning by following the right instructions. The other problems can be sorted by changing the unit causing the issue. You must be finding out the problem with help of the best Xerox machine Service provider.
WRINKLED PAGES
It’s not considered to be a big issue; you can easily fix it by replacing the paper trays. but, if you doing that, you cannot use the copy pages which come out from the machine crinkled, that wrinkled page is not good to show in the big sales meeting, it looks like you dug out the papers from the bottom of the student’s rough not. The issue may cause by the humidity of the paper trays. if you noticed the paper damaged for any reason, don’t use it instead you can replace the new one with help of the professional Xerox machine dealers in Chennai.
PAPER JAMS
Paper jams are the most common copier machine problem encountered by the working employee. This may cause only when you load improper paper or the wrong paper size. the various issue will arise if you load the wrong size papers like resulting in a jam, copiers to pull paper incorrectly. if you do not fix it immediately you may face major problems in your working environment. Fixing these kinds of issues you need an expert to remove the jammed paper and reload the right page size. This may be the issue of paper dust, which leads to paper jams. The better way to get rid of the paper dust is to periodically you must wipe the feed to try to clean and keep way the vacuum built up inside the copier.
COPIES ARE TOO DARK OR TOO LIGHT
The resulting of copied pages sometimes too dark or too light, may lead to an imbalance in the copier machine density controls. To fix the issue resetting the density levels is the right solution. However, the lifetime of the drum could be the end of the toner of the copier machine has gone bad. Replacements should be installed and purchased.
Therefore if you are searching for the finest Xerox Machine Services in Chennai you can contact @ 9551075767
